Sheet Metal Bend Allowance Calculator

Degrees the flange turns from flat (90° = right-angle bend).
°
Inside bend radius (the radius the punch forms on the inside of the bend).
mm
Sheet thickness.
mm
Neutral-axis position; ~0.33 for air bending, up to ~0.45.

Results

Default result
Edit inputs
Bend allowance (BA)
5.749 mm

Neutral-axis arc length through the bend.

Also computed

Bend deduction (BD) 4.251 mm

Subtract one per bend from the summed outside flanges to get the flat length.

Outside setback (OSSB) 5 mm

Method notes 2 notes
  • Flat (blank) length = sum of the outside flange lengths − one bend deduction per bend.
  • The K-factor places the neutral axis as a fraction of thickness; it is empirical and varies with material, tooling and bending method — verify it with a test bend.

Powered by MachineCalcs ↗