Keyway Dimension Calculator

Nominal shaft diameter; the standard key is selected from its range.
mm
DIN 6885 keyway fit: free (guided), normal (usual), or close (reversing/shock).

Results

Default result
Edit inputs
Key width (b)
12 mm
Pass

12 × 8 key.

Also computed

Key height (h) 8 mm

Shaft keyway depth (t₁) 5 mm

Hub keyway depth (t₂) 3.3 mm

Shaft Ø under keyway 35 mm

d − t₁ (depth gauge over the shaft bottom).

Hub bore over keyway 43.3 mm

bore + t₂.

Method notes 3 notes
  • Normal fit (DIN 6885): shaft keyway N9, hub keyway JS9, key width h9. The usual choice.
  • Shaft keyway depth t₁ is measured from the shaft surface; hub keyway depth t₂ from the bore. Together t₁ + t₂ ≈ key height h plus clearance.
  • Per DIN 6885-1; verify against the standard and the mating part. Tolerance/fit class sets the width tolerance, not the nominal size.

Powered by MachineCalcs ↗